Electrical Engineering Interview Questions and Answers
Intermediate / 1 to 5 years experienced level questions & answers
Ques 1. Explain the difference between AC and DC.
AC (Alternating Current) changes direction periodically, while DC (Direct Current) flows in one direction consistently.
Example:
Household electrical outlets provide AC, while batteries provide DC.
Ques 2. What is the purpose of a transformer?
A transformer is used to change the voltage of an alternating current, either increasing (step-up) or decreasing (step-down) the voltage.
Example:
Power distribution often involves step-up and step-down transformers.
Ques 3. Explain the working principle of a DC motor.
DC motors convert electrical energy into mechanical energy through the interaction of magnetic fields and current-carrying conductors.
Example:
In a simple DC motor, a coil of wire interacts with a magnetic field, causing it to rotate.
Ques 4. What is the difference between insulation and isolation in electrical systems?
Insulation prevents the flow of electric current, while isolation physically separates electrical components or systems to avoid unintended interactions.
Example:
Insulation can be in the form of non-conductive materials, while isolation may involve physical barriers.
Ques 5. What is the significance of the star-delta transformer connection in three-phase systems?
The star-delta connection is used to reduce the starting current of induction motors in three-phase systems, improving efficiency.
Example:
During startup, the motor is connected in a star configuration, and then switched to delta for normal operation.
Ques 6. What is the difference between a fuse and a circuit breaker?
Both are protective devices, but a fuse is a one-time-use component that melts when current exceeds a certain limit, while a circuit breaker can be reset and reused.
Example:
Fuses are common in older homes, while circuit breakers are more modern.
Ques 7. What is a semiconductor, and how is it used in electronic devices?
A semiconductor is a material with conductivity between that of a conductor and an insulator. It is widely used in electronic devices, such as transistors and diodes.
Example:
Silicon is a commonly used semiconductor material.
Ques 8. What is the significance of the time constant in RC circuits?
The time constant is the time required for the voltage or current in an RC circuit to reach approximately 63.2% of its final value during charging or discharging.
Example:
It is calculated as the product of resistance and capacitance (Ï„ = RC).
Ques 9. Explain the concept of hysteresis in magnetic materials.
Hysteresis is the lagging of the magnetic induction in a material behind the changing magnetic field, causing energy loss and heat generation.
Example:
Soft magnetic materials exhibit low hysteresis for efficient transformer cores.
Ques 10. What is a Schottky diode, and how does it differ from a regular diode?
A Schottky diode is a type of semiconductor diode with a low forward voltage drop and fast switching times, making it suitable for high-frequency applications.
Example:
Used in rectifiers and voltage clamping circuits.
Ques 11. What is the significance of the power factor correction in electrical systems?
Power factor correction is employed to improve the power factor of a system, reducing reactive power and improving efficiency.
Example:
Capacitors are often used for power factor correction.
Ques 12. What is the purpose of a lightning arrester in power systems?
A lightning arrester protects electrical equipment from damage caused by lightning strikes by providing a low-resistance path for the surge current to the ground.
Example:
Commonly installed on power lines and substations.
Ques 13. What is a relay, and how is it used in electrical systems?
A relay is an electrically operated switch that uses an electromagnet to control the opening or closing of its contacts, allowing it to control high-power circuits with a low-power signal.
Example:
Used in control circuits, automation, and protection systems.
Ques 14. What is the role of a capacitor in an electronic circuit?
A capacitor stores electrical energy in an electric field and releases it when needed, smoothing voltage fluctuations and filtering signals.
Example:
Commonly used in power supply circuits and coupling applications.
Ques 15. Explain the term 'load shedding' in power systems.
Load shedding is the intentional reduction of electric power to certain areas or consumers during peak demand periods to prevent widespread power outages.
Example:
Utilities may implement load shedding to balance supply and demand.
Most helpful rated by users:
- What is Ohm's Law?
- Define the term 'Grounding' in electrical systems.
- Explain the concept of electric potential.
- What is the role of a voltage regulator in electronic devices?
- Explain the difference between AC and DC.
Related interview subjects
| Civil Engineering interview questions and answers - Total 30 questions |
| Electrical Machines interview questions and answers - Total 29 questions |
| Data Engineer interview questions and answers - Total 30 questions |
| AutoCAD interview questions and answers - Total 30 questions |
| Robotics interview questions and answers - Total 28 questions |
| Power System interview questions and answers - Total 28 questions |
| Electrical Engineering interview questions and answers - Total 30 questions |
| Verilog interview questions and answers - Total 30 questions |
| VLSI interview questions and answers - Total 30 questions |
| Software Engineering interview questions and answers - Total 27 questions |
| MATLAB interview questions and answers - Total 25 questions |
| Digital Electronics interview questions and answers - Total 38 questions |